Configuring Switches with LISY80
Related Config File Sections:
LISY80 supports the System 80 switch matrix which consists of a maximum of 64 switches. The switch number in the manual of your machine can be used within MPF. However, you may not find all switches in your game manual as some switches are the same along all System80/80A/80B games and Gottlieb decided not to document them ;-). Those are the following (according to pinwiki.com):
- 06 - left advance button (Sys80B only)
- 07 - play / test switch
- 16 - right advance button (Sys80B only)
- 17 - left coin switch
- 27 - right coin switch
- 37 - center coin switch
- 47 - replay button
- 57 - plumb bob and ball roll tilts (these have the same switch assignment as the playfield tilt switch)
Note
The SLAM switch in system80, which is not part of the switch matrix
and cannot be used in mpfserver for LISY80 in the current release.
You can start with this config:
switches:
tilt:
number: 57
Then just add your switches according to the manual of your machine. See switches: for more details about switches.
What if it did not work?
Have a look at our LISY troubleshooting guide.
Something missing or wrong? You can fix it!
This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?
Please help us! You can fix it yourself and be an official "open source" contributor!
It's easy! See our Beginner's guide to editing the docs.
Page navigation via the keyboard: < >
You can navigate this site via the keyboard. There are two modes:
General navigation, when search is not focused:
- F , S , / : open search dialog
- P , , : go to previous page
- N , . : go to next page
While using the search function:
- Down , Up : select next / previous result
- Esc , Tab : close search
- Enter : go to highlighted page in the results