How to configure Multimorphic (P-ROC & P3-ROC) hardware

This section is maintained by the hardware maker

This section of the MPF website is about a specific company's pinball controller hardware, and they are responsible for maintaining the content here.

Of course feel free to edit, add, and/or correct things if you want, but if something seems weird, reach out to the hardware maker, not the MPF maintainers. ;)

Here's a list of all the How To guides which explain how to use MPF with Multimorphic P-ROC and P3-ROC control systems. These guides include the numbering format (how you map specific entries in your config files to board and connector locations) as well as overall settings that affect how your hardware performs.

Overview video about the Multimorphic P3-Roc system:

3 steps to using a P-ROC/P3-ROC

Install the hardware drivers to support the P-ROC/P3-ROC.
Configure your platform.
Configure the individual pinball mechanisms from the list below.

P-ROC/P3-ROC pinball mech configuration

The following pinball mechanisms are supported by the P-ROC and/or P3-ROC. Click each one for details on how to configure these types of mechanisms for the P-ROC or P3-ROC.

Something missing or wrong? You can fix it!

This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?

Please help us! You can fix it yourself and be an official "open source" contributor!

It's easy! See our Beginner's guide to editing the docs.

Page navigation via the keyboard: < >

You can navigate this site via the keyboard. There are two modes:

General navigation, when search is not focused:

F , S , / : open search dialog
P , , : go to previous page
N , . : go to next page

While using the search function:

Down , Up : select next / previous result
Esc , Tab : close search
Enter : go to highlighted page in the results