RE-P-Roc-1 - Known Firmware Bug in P/P3-Roc
Related Config File Sections:
This error occurs when you try to use
pulse_power on drivers on the
P3-Roc with firmware 2.14 or earlier and enable a rule with hold.
This can be solved by either removing
pulse_power from the coil in
question or by upgrading the firmware. Firmware can be obtained from the
Multimorphic Member Area.
See How to update the Firmware of the P-Roc or P3-Roc for details about the upgrade process.
Need more help troubleshooting?
Have a look at our Troubleshooting section. It might give you some hints for certain classes of problems.
What if this did not fix your problem?
Is something missing here? Do you have a helpful hint for others experiencing this error?
Related How To guides
- How to configure Multimorphic (P-ROC & P3-ROC) hardware
- Troubleshooting P-Roc/P3-Roc
- How to update the Firmware of the P-Roc or P3-Roc
Something missing or wrong? You can fix it!
This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?
Please help us! You can fix it yourself and be an official "open source" contributor!
It's easy! See our Beginner's guide to editing the docs.
Page navigation via the keyboard: < >
You can navigate this site via the keyboard. There are two modes:
General navigation, when search is not focused:
- F , S , / : open search dialog
- P , , : go to previous page
- N , . : go to next page
While using the search function:
- Down , Up : select next / previous result
- Esc , Tab : close search
- Enter : go to highlighted page in the results