Skip to content

OPP Lights

Related Config File Sections:

If you're using an OPP incandescent wing card, the lights are numbered the same as the input switches. OPP bulbs are numbered sequentially depending on which wing board controls the output. Wing position 0 contains bulbs 0 to 7. Wing position 1 contains bulbs 8 to 15. Wing position 2 contains bulbs 16 to 23. Wing position 3 contains bulbs 24 to 31. The bulb is numbered using the position of the OPP card (starting at 0), then a '-', and finally the bulb number on the card.

    number: 1-16
    subtype: matrix

The above example configures a bulb on the second OPP card, and the third wing board, first bulb On the microprocessor card, the input is marked as 2.0 (wing port 2, position 0).

What if it did not work?

Have a look at our OPP troubleshooting guide.

Something missing or wrong? You can fix it!

This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?

Please help us! You can fix it yourself and be an official "open source" contributor!

It's easy! See our Beginner's guide to editing the docs.

Page navigation via the keyboard: < >

You can navigate this site via the keyboard. There are two modes:

General navigation, when search is not focused:

  • F , S , / : open search dialog
  • P , , : go to previous page
  • N , . : go to next page

While using the search function:

  • Down , Up : select next / previous result
  • Esc , Tab : close search
  • Enter : go to highlighted page in the results