Skip to content

Connecting Your Computer Keyboard to MPF Switches

Related Config File Sections:

The MPF media controller includes a keyboard interface which allows you to interact with your running machine via a computer keyboard. In most cases you'd use this to simulate pinball switch events via keys on your keyboard, but you can also post MPF events via keyboard presses. You can map single key presses or combinations of keys, and you can use the keyboard module with or without a physical pinball machine connected to your computer.

To use the keyboard interface, you add a keyboard: section to your machine configuration file and then create a list which maps keyboard keys to pinball machine switch names or MPF events. Then when you press a key on the keyboard, the switch controller receives that event and sends it to the game. The keyboard module tracks both key-down and key-up events, so you can hold down a key to represent a ball sitting on a switch. You can also set several options for each key, including:

  • Specify that a key is a "toggle" key, meaning the switch stays in the state even after you let go of the key. (In other words, tap the key once to activate the switch. Tap it again to deactivate it.) This is helpful for things like your trough or ball locks where you want to simulate a ball sitting on a switch but you don't want to play a crazy game of keyboard Twister where you're trying to hold down all these keys at once.
  • Specify that a key is inverted, so pressing (or holding) the keyboard key deactivates the switch, and releasing it activates the switch. (Note this is not needed to compensate for normally-closed switches, as the switch controller handles that automatically. This is just is you want to invert the computer's keyboard action.)
  • Specify combo keys, so you can set up one switch action for the Skey, a different one for CTRL+S, another one for SHIFT+S, etc.

Note that you can also use the MPF Monitor for this. However, often it is faster to use the keyboard to change switch states. You can also use the MPF monitor and your keyboard in tandem. Most people use keyboard mappings to change balls in troughs for example.

Additionally, the keyboard: section is nice for posting ad-hoc and debug events. For instance, it can be very useful to be able to start modes using the keyboards when you are testing them if it is nontrivial to start them.

Here's an example of it in action:

    switch: left_flipper
    switch: right_flipper
    switch: start
    switch: trough1
    toggle: true
    switch: trough2
    toggle: true
    switch: lock_post
    invert: true
    event: machine_reset
    event: advance_reel_test
      reel_name: score_1p_10
      direction: 1

You can also read more about the keyboard: section in the Tutorial step 6: Add keyboard control documentation.

Key & key combination entries

Once you create your keyboard: section, you create subsections for each key or key combination you want to configure. For simple keys (without modifiers), you can just enter the key. (In the sample file above, this is z, s, 1, 2, q, and 4.)

These entries are not case sensitive.

Using special keys

For "special" keys, it's probably just easiest to enter the keys as words. Here are some examples of words that map to keys:

  • equals
  • minus
  • dash
  • leftbracket
  • rightbracket
  • backslash
  • apostrophe
  • semicolon
  • colon
  • comma
  • period
  • slash
  • question

Note that you can't use the Escape key because that's currently hard-coded to exit out of MPF when you hit it.

Note that this keyboard interface focuses on keys, not symbols. In other words the "plus" key is if you have a full size keyboard with a number pad which has a dedicated plus key. If you're using a laptop with the shared plus & equals key, that is the equals key, or the equals key with a shift modifier.

Adding SHIFT, CTRL, and ALT modifiers

Since there are probably more switches in your machine then there are keys on your keyboard, you can also specify key combinations along with the key entries. These are called "modifier keys," and MPF supports them in combination with regular keys, like this:

#! keyboard:
    switch: foo
    switch: tilt
    switch: slam_tilt

Starting in MPF 0.33, you an add debug: true in the keyboard: section to get a printout on the console of the current key and/or modifiers that are pushed down which is helpful in figuring out exactly what the modifier keys are called on your system.

Use it like this:

   debug: yes

This will print out results live as you hit keys and combinations which will look something like this:

KEYS: shift
KEYS: shift+s
KEYS: super
KEYS: meta+c
KEYS: shift
KEYS: shift+d
KEYS: lctrl
KEYS: ctrl+f
KEYS: escape

What if it did not work?

Make sure debug: true is set under keyboard as described above.

Look at your log files to see what your key strokes are.

It is possible that numlock key is on by default (especially with a laptop that does not have dedicated numlock key and running Windows).

You might see something like this:

Keyboard : Processing key stroke for key s-numlock
Keyboard : Processing key stroke for key s-numlock

If that is the case you may have to edit your computer's registry or run powershell to turn off numlock.

Something missing or wrong? You can fix it!

This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?

Please help us! You can fix it yourself and be an official "open source" contributor!

It's easy! See our Beginner's guide to editing the docs.

Page navigation via the keyboard: < >

You can navigate this site via the keyboard. There are two modes:

General navigation, when search is not focused:

  • F , S , / : open search dialog
  • P , , : go to previous page
  • N , . : go to next page

While using the search function:

  • Down , Up : select next / previous result
  • Esc , Tab : close search
  • Enter : go to highlighted page in the results