light_rings:
This is a config file reference. Click for instructions.
This page is reference material which explains every setting and option for this section of an MPF yaml config file. See the instructions for config files for formatting and other details. See our guide to config file examples for more examples of real configs in action.
| Valid in | |
|---|---|
| machine config files | YES  |
| mode config files | NO  |
A "light_rings" will create "count" lights for you starting the number at "number_start". If you need a prefix or suffix for the number you can use "number_template". All settings in "light_template" will be applied to all lights. The only difference between light_stripes and light_rings is how the x/y coordinates are computed.
Required settings
The following sections are required in the light_rings: section of
your config:
count:
Single value, type: integer. Defaults to empty.
The integer value for how many LEDs are in the ring.
light_template:
Single value, type: lights:. Defaults to empty.
This is a list of sub-settings (indented) that are regular settings from the ../about/help_us_to_write_it section of your machine config. Any settings that are valid there are valid here, and they're applied to all the LEDs in the ring.
Optional settings
The following sections are optional in the light_rings: section of
your config. (If you don't include them, the default will be used).
center_x:
Single value, type: number (will be converted to floating point).
Defaults to empty.
The "x" position of the center of the ring. (This is not used in MPF yet.)
center_y:
Single value, type: number (will be converted to floating point).
Defaults to empty.
The "y" position of the center of the ring.
number_start:
Single value, type: integer. Default: 0
The integer value for the number for the first LED in the ring. (MPF assumes that all the LEDs in the ring are numbered sequentially.)
number_template:
Single value, type: string. Defaults to empty.
MPF automatically configures the LEDs in a ring. The first one uses the
number_start: value, and then it counts up from there up through the
count: value.
However, many hardware numbers for LEDs are not just vanilla numbers,
rather they also include a board number or channel or something like
that. The number_template: is where you specify what that number value
looks like. Just use braces {} for the part you want replaced by a
number.
The example config with a number template of 7-{} with a number start
of 200 and a count of 5 will create 5 LEDs with the numbers 7-200,
7-201, 7-202, 7-203, and 7-204.
previous:
Single value, type: string name of a lights: device. Defaults to empty.
Help us write it!
This section is unwritten or needs an update or edit. Can you help write it? Get your name in lights and geeky pinball bragging rights! Hit the magic sparkly wand to the right of the title to see this page source on GitHub. Then add/edit and submit your change. It's easy!
radius:
Single value, type: number (will be converted to floating point).
Defaults to empty.
The radius of the ring (in relative size to the x/y coordinates of the
center_x: and center_y: positions. This is used for the calculation
of x/y positions of individual LEDs only.
start_angle:
Single value, type: number (will be converted to floating point).
Default: 0
The angle (in degrees, 0-360) of the first LED in the right. This is used for the calculation of x/y positions of individual LEDs only.
start_channel:
Single value, type: string. Defaults to empty.
Help us write it!
This section is unwritten or needs an update or edit. Can you help write it? Get your name in lights and geeky pinball bragging rights! Hit the magic sparkly wand to the right of the title to see this page source on GitHub. Then add/edit and submit your change. It's easy!
console_log:
Single value, type: one of the following options: none, basic, full.
Default: basic
Log level for the console log for this device.
debug:
Single value, type: boolean (true/false). Default: false
Set this to true to see additional debug output. This might impact the performance of MPF.
file_log:
Single value, type: one of the following options: none, basic, full.
Default: basic
Log level for the file log for this device.
label:
Single value, type: string. Default: %
Name of this device in service mode.
tags:
List of one (or more) values, each is a type: string. Defaults to
empty.
Not used.
Related How To guides
Help us write it!
This section is unwritten or needs an update or edit. Can you help write it? Get your name in lights and geeky pinball bragging rights! Hit the magic sparkly wand to the right of the title to see this page source on GitHub. Then add/edit and submit your change. It's easy!
Something missing or wrong? You can fix it!
This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?
Please help us! You can fix it yourself and be an official "open source" contributor!
It's easy! See our Beginner's guide to editing the docs.
Page navigation via the keyboard: < >
You can navigate this site via the keyboard. There are two modes:
General navigation, when search is not focused:
- F , S , / : open search dialog
- P , , : go to previous page
- N , . : go to next page
While using the search function:
- Down , Up : select next / previous result
- Esc , Tab : close search
- Enter : go to highlighted page in the results