Skip to content

Modes

Game modes are a big part of pinball programming and a big part of MPF, so it's worth taking an in-depth look at what they are and how they work.

Related Config File Sections:

As a pinball player, you're probably familiar with the concept of "modes." Most modern machines have lots of different modes, and typically you complete various modes throughout a game on your way to the wizard mode. Many machines have lights on the playfield that show what modes have been completed so far. The player might need to do something to light a "start mode" shot, and then when that shot is made, the mode starts. Then the mode runs for awhile, and while it's running there's typically some kind of sub-goal. (Hit as many standups as you can, shoot both ramps, get as many pop bumper hits as possible, etc.) Some modes run for a predetermined amount of time (e.g. 30 seconds or until the ball drains), some modes are multiball and stop when there's only one ball left, some modes run until the ball ends, some modes run until you complete the mode's objectives, and some modes just sort of run forever.

MPF takes a slightly different approach to modes. In MPF, modes are used for almost everything---a lot more than just "in game" modes. For example, the attract mode is a "mode" in MPF, as is the bonus processing, the high score name entry, and lots of other things that you wouldn't think of as a traditional game mode. In fact even the "game" itself is a mode in MPF! MPF includes many built-in modes (that you can use outright or customize), and you can create your own modes as needed.

We documented the general approach to design a game in the Game Design section.

How modes work in MPF

To add a mode to your MPF machine configuration, you create a folder called modes in your machine's folder. Then inside there, you create subfolders for each mode in your machine, like this.

In your game, you might have dozens (or even hundreds) of mode folders. Each of your modes folders is almost like a mini-MPF configuration that's only active during that mode. You can have subfolders in each mode folder for game assets, config files, and code that only apply to that mode, like this:

Each of a mode's subfolders follows the same structure as your machine folder in general. The config folder holds YAML configuration files, the shows folder holds show files, the sounds folder contains audio files, the animations folder contains animations, etc. (Note that not every type of folder will be in every mode. If a mode doesn't have a specific type of content, then you don't need to include the folder for it.) The idea is that each subfolder holds everything that mode needs, and everything in a mode's folder only applies to that specific mode. For example, in a mode's config file, you can add several types of configuration entries (as detailed in the configuration file reference), that only apply when that mode is active, including:

  • shows
  • slides
  • multiballs
  • ball locks
  • sounds
  • shows
  • scoring
  • etc.

Again, anything that's specified in a mode's configuration file is only active while that mode is active. So if you have a mode called "multiball" with the following entry in that mode's config file:

##! mode: my_mode
variable_player:
  right_ramp_hit:
    score: 50000

In that case the right_ramp_hit shot event will only award the points when that multiball mode is running. When it stops, that variable_player/scoring configuration is removed. (You can also configure certain events to be "blocked" from propagating down to lower-priority modes. More on that in a bit.)

Machine-wide versus mode-specific folders and configurations

You might have noticed that many of the settings you add to mode- specific configuration files are also valid settings for the machine- wide configuration files which can exist in your_machine_folder/config/config.yaml file. So what's the difference between the two? If you configure a setting in a machine-wide configuration file, then that setting will be available at all times in your machine. If you configure a setting in a mode-specific configuration file, then that setting will only apply when that mode is active. The same is true for asset files (in your images, animations, movies, sounds, or shows folder). For example, if you put a sound file in your_machine_folder/sounds folder, then that sound will be available to any mode in your machine. If you put it in the sounds folder under a specific mode, then that sound file will only be available to that mode. You can even configure assets to automatically load when a mode starts and unload when a mode ends---a feature that is necessary on memory-limited hardware platforms like the BeagleBone Black. The reason MPF's mode system was built this way is so that each mode is self-contained. This is especially useful in situations where more than one person is working on a particular game. You can think of each mode's folder as a mini self-contained MPF environment, as each mode will have its own files and configuration. This also makes it easier to keep track of which modes use which files.

When to use modes

As you read this, it's natural to think of MPF's modes like game modes, and certainly that's a big part of how they're used. But there is no limit to the number of modes that can be active at any one time (and it doesn't negatively affect performance to have dozens of modes running at once), so when you start programming your game you'll probably end up breaking your game logic into lots of little modes.

For example, skill shot should be implemented as a mode. You could create a mode called skill_shot that loads when a new player is up, and while it's active it can light certain shots and award points and play light shows and animations associated with the skill shot. You can also setup a timer that automatically starts running when the ball is plunged, and then when the timer ends, you can configure it to unload the skill shot mode. (You would also configure the skill shot mode to stop and unload as soon as the skill shot is made.) You might also have modes which track combos, progress towards ball locks, or really anything else you want.

The key with modes in MPF is to understand that they're more than game modes. You'll create lots and lots of them for all sorts of things. (Basically anything you want which temporarily changes switches, rules, scoring, or any type of device behavior will be a mode in MPF.)

Adding your modes to your machine configuration

If you want to add a mode to your game, you need to add a modes: section to your machine configuration file and then create an entry for each mode (by listing the folder), like this: (It's important to have the dash in front of each line.)

modes:
  - skillshot
  - base
  - both_ramps_made
  - gun_fight
  - multiball
  - skillshot
  - watch_tower

The reason for this is that you might have some modes in your modes folder that you're working on that aren't complete yet, or you might want to build different sets of configuration files that use different modes. So you have to list all the modes that you want to use in your machine config file for MPF to read in those modes.

Working with mode-specific config files

We already mentioned that each mode in MPF is really like a full "mini" instance of MPF with settings and assets that only apply to that specific mode. So just like the root MPF config, you create a config subfolder in each mode's folder, and then you put a YAML configuration file in that mode's config folder that holds all the config settings for that mode. Recall that the default config file name for your machine-wide configuration is a file called config.yaml. When you setup a mode's specific config file, you do so by naming the file <mode_name>.yaml. (So this file would be <your_machine_file>/modes/<mode_name>/config/<mode_name>.yaml file.)

For example, the configuration file for a skill shot mode might be <your_machine_file>/modes/skillshot/config/skillshot.yaml. The reason each mode's config file is based on the mode name rather than just being called config.yaml is simply for the convenience of the programmer. Our experience is that when we're working on a game, we typically have lots of tabs open in our file editor, and it's really confusing if all the tabs are named config.yaml! So we made it so each mode's config file is based on the mode name instead. In each mode's config file, you can add an entry called mode: which holds settings for the mode itself. Typically this is just a list of MPF events that will cause the mode to start and stop, as well as the priority the mode runs at, the name of the mode, and whether the mode has any custom Python code that goes with it. (Full details of this are in the mode: section of the configuration file reference.)

Organizing modes in subfolders

Modes can also be organized in subfolders. So your modes folder structure could look like:

modes
  high_score
  band_gb
     gb_base
     gb_rockfest
  band
     sq
        first_avenue
        release

Each mode must include the config subfolder with the configuration file. Any folder that includes the config subfolder will not be scanned for further modes.

Starting and stopping modes

Modes stop and start based on standard MPF events. For example, if you want a mode to run whenever a ball is in play, you'd add ball_starting to the mode's start events list, and you wouldn't specify a stop event. If you want a mode to automatically stop when a timer expires, you'd add the name of the event that's posted when the timer ends to the mode's stop events list.

Mode priorities

When you set up the configuration for a mode (via the mode: section of that mode's config/<mode_name>.yaml file, you can optionally specify a priority for that mode. Specifying a priority for a mode is useful when you have more than one mode running and you want to control how all the running modes interact with each other.

For example, you can configure scoring events so they "block" lower level modes which have score configured for the same event. So you might have a base game mode which scores 10k points for a ramp shot, but then in one particular mode you might want to make the ramps worth 100k points. To do this you would add the scoring setting for 100k to your special mode, and then you'd run that mode at a higher priority than your base game mode and configure the scoring for that event to block the scoring from the lower mode. (Otherwise you'd get both scoring events and a ramp shot would grant 110k points.) Whether you configure a scoring event to block or not is optional, and you can specify it on an individual basis per scoring event. (And in many case you very well might want to score both events from both modes.)

The mode priorities also affect the priorities of things like all display widgets and slides. For example, your base mode might play an animation and a light show when a ramp shot is made in the base game mode, but when your special higher mode is running you might want to play a different slide and a different light show. So by specifying the special mode to run at a higher priority, it will get priority access to the display and lights. (Again you can configure this on a setting-by-setting basis, because there are plenty of times where you might actually want the lower-priority shows to play even when a higher priority mode is running.)

Note

In MPF prior to v0.20, there was the concept of "machine" modes and "game" modes. Starting with MPF v0.20, those have been combined, and they're just called modes. MPF comes with its own built-in modes that will be mixed together with your own machine-specific modes. For example, MPF includes modes for attract (priority 10) and game (priority 20) which are responsible for the fundamentals of running the attract and game modes.

Using modes as game logic

Related How To Guides

Related Events

Built-in Modes

MPF includes several "built-in" modes which are ready to use in your game. Some of them are used automatically, and some require that you add some config sections and options to your machine. Click on each for details:

Something missing or wrong? You can fix it!

This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?

Please help us! You can fix it yourself and be an official "open source" contributor!

It's easy! See our Beginner's guide to editing the docs.

Page navigation via the keyboard: < >

You can navigate this site via the keyboard. There are two modes:

General navigation, when search is not focused:

  • F , S , / : open search dialog
  • P , , : go to previous page
  • N , . : go to next page

While using the search function:

  • Down , Up : select next / previous result
  • Esc , Tab : close search
  • Enter : go to highlighted page in the results