Skip to content

RE-P-Roc-1 - Known Firmware Bug in P/P3-Roc

Related Config File Sections:

This error occurs when you try to use pulse_power on drivers on the P3-Roc with firmware 2.14 or earlier and enable a rule with hold.

This can be solved by either removing pulse_power from the coil in question or by upgrading the firmware. Firmware can be obtained from the Multimorphic Member Area.

See How to update the Firmware of the P-Roc or P3-Roc for details about the upgrade process.

Need more help troubleshooting?

Have a look at our Troubleshooting section. It might give you some hints for certain classes of problems.

What if this did not fix your problem?

Please tell us about your error in the community forum and we might be able to update this page afterwards. Or even better: You help us to update it afterwards.

Is something missing here? Do you have a helpful hint for others experiencing this error?

Please create a Pull Request and add it. Alternatively, please tell us in the community forum.

Something missing or wrong? You can fix it!

This website is edited by people like you! Is something wrong or missing? Is something out of date, or can you explain it better?

Please help us! You can fix it yourself and be an official "open source" contributor!

It's easy! See our Beginner's guide to editing the docs.

Page navigation via the keyboard: < >

You can navigate this site via the keyboard. There are two modes:

General navigation, when search is not focused:

  • F , S , / : open search dialog
  • P , , : go to previous page
  • N , . : go to next page

While using the search function:

  • Down , Up : select next / previous result
  • Esc , Tab : close search
  • Enter : go to highlighted page in the results