self.machine.hardware_platforms[‘system11’]

class mpf.platforms.system11.System11OverlayPlatform(machine: mpf.core.machine.MachineController)

Bases: mpf.core.platform.DriverPlatform, mpf.core.platform.SwitchPlatform

Overlay platform to drive system11 machines using a WPC controller.

Accessing the system11 platform via code

Hardware platforms are stored in the self.machine.hardware_platforms dictionary, so the system11 platform is available via self.machine.hardware_platforms['system11'].

Methods & Attributes

The system11 platform has the following methods & attributes available. Note that methods & attributes inherited from base classes are not included here.

a_side_active

Return if A side cannot be switches off right away.

a_side_busy

Return if A side cannot be switches off right away.

c_side_active

Return if C side cannot be switches off right away.

c_side_busy

Return if C side cannot be switches off right away.

clear_hw_rule(switch, coil)

Clear a rule for a driver on the system11 overlay.

configure_driver(config: mpf.core.platform.DriverConfig, number: str, platform_settings: dict)

Configure a driver on the system11 overlay.

Parameters:

config – Driver config dict
number – Number of the driver.
platform_settings – Platform specific config.

configure_switch(number: str, config: mpf.core.platform.SwitchConfig, platform_config: dict)

Configure switch on system11 overlay.

driver_action(driver, pulse_settings: Optional[mpf.platforms.interfaces.driver_platform_interface.PulseSettings], hold_settings: Optional[mpf.platforms.interfaces.driver_platform_interface.HoldSettings], side: str)

Add a driver action for a switched driver to the queue (for either the A-side or C-side queue).

Parameters:

driver – A reference to the original platform class Driver instance.
pulse_settings – Settings for the pulse or None
hold_settings – Settings for hold or None
side – Whatever the driver is on A or C side.

This action will be serviced immediately if it can, or ASAP otherwise.

get_hw_switch_states()

Get initial hardware state.

initialize()

Automatically called by the Platform class after all the core modules are loaded.

set_pulse_on_hit_and_enable_and_release_and_disable_rule(enable_switch: mpf.core.platform.SwitchSettings, eos_switch: mpf.core.platform.SwitchSettings, coil: mpf.core.platform.DriverSettings, repulse_settings: Optional[mpf.core.platform.RepulseSettings])

Configure a rule for a driver on the system11 overlay.